PRODUCTEN
EShop-nummer
Wachtwoord
Welcome to CAIROX BELGIUM

KT-1 • Thermostats

The thermostat KT-1 from KRONOTERM measures and displays the room temperature. The desired room temperature can be adjusted. The status of the heating circuit and the circuit settings can be viewed.

Brand

  • KRONOTERM

Application

In combination with the ETERA heat pump:
    • Measure and display the room temperature
    • Set the desired room temperature
    • Configure which heating circuits are to be controlled
    • Display and control the status of the heating circuits.

Characteristics

  • Each thermostat can control one separate heating circuit (for example, different zones in a home).
  • When installing, it must be selected which heating circuit (1 to 4) is controlled by the thermostat.
  • The thermostat helps to optimize the indoor climate through accurate temperature measurement and easy adjustment.
  • Features of the KT-1 wall thermostat
    • Large, clear screen
    • Operation with physical buttons (↑ ↓ )
    • The KT-1 is connected to the ETERA heat pump via a 4-wire data cable (A+, B-, GND, +12V)
    • Communication via Modbus RS485
    • Up to four KT-1/KT-2A thermostats can be connected to one ETERA, each to a separate heating circuit.

In summary: the KT-1 works as a "room thermostat" and as a "zone controller" that works seamlessly with the ETERA heat pump to heat or control multiple rooms individually.

Composition

1. Control module (hardware)
  • LED display: for displaying the current and desired room temperature
  • Control buttons: 2 buttons for setting the temperature and assigning heating/cooling circuits (↑, ↓)
  • Display brightness setting
  • Casing: compact square design, suitable for wall mounting or surface mounting (provided ND_KT-1)
2. Software and functions (interface)
  • Control algorithms:
    • Temperature control per zone.
3. Connectivity
  • Communication with the KSM controller: 4-wire via Modbus RS485 communication.
4. Sensor interface
  • Internal sensors: measures the room temperature

Options

  • KIT_P2P KT-1/KT-2A Kit for upgrading a 2-wire cable to a 4-wire cable for connecting a KT-1 or a KT-2A to the KSM control of the ETERA
  • ND_KT-1 Wall-mounted surface-mounted connection box for KT-1 (by default, KT-1 is a flush-mounted thermostat)

Versions

  • KT-2A Wall mount room thermostat or controller or both
  • KT-1 Wall mount room thermostat

Order example

  • KT-1
Explanation
KT-1 Wall-mounted room thermostat

HELPCopyrightSales conditionsCookie policyAirvance Group

Informatie aanvragen. Even geduld a.u.b...