HYDRO BA • Free standing water heaters for geothermal heat pump ETERA

The HYDRO BA is a freestanding water heater designed to work in combination with the ETERA geothermal heat pump from KRONOTERM. This 200 L stainless steel water heater is equipped with a water heater charging pump and an associated plate exchanger and is available in a version with or without a built-in expansion vessel of 8 L. If there is sufficient space on the right side of the ETERA heat pump for an installation in conjunction, the HYDRO B boiler can also be chosen.

• KRONOTERM

• The HYDRO BA is installed as a stand-alone boiler for operation in combination with the ETERA heat pump
• The boiler loading system provides a large amount of sanitary hot water in a short time
• Possibility to connect a return pump and return pipe

• Aesthetic: Because the freestanding water hetaer HYDRO BA has the same appearance as the ETERA heat pump, they form an ideal tandem. By using the template and the hydraulic pipes that are pre-fitted to the wall, the units can be installed without visible pipes.
• Ease of installation: The pre-assembly of the pipes, the built-in pump and the expansion vessel (according to the chosen version) makes installation quick and easy.
• Compact: The HYDRO BA water heater takes up less than 0.5 m² of floor space.
• Composition: Because the HYDRO BA is a freestanding water heater, it is supplied with not only a front panel but also two side panels.

Casing made of white powder-coated, galvanised steel sheets

• With side panels, because this is a freestanding boiler
• White powder-coated metal front door with magnetic closure
• Hot water heater as a charging water heater made of stainless steel AISI 444, 200L with a maximum working pressure of 8 bar
• Plate heat exchanger for heating of domestic hot water
• Water heater charging pump for domestic water
• With or without 8 L expansion vessel for DHW depending on the selected model HYDRO BA/1F or BA/1F A1
• Integrated DHW safety valve 8 bar
• Drain tap
• Temperature sensor
• Mounting bracket and template to prepare the mounting
• The HYDRO BA water heater is supplied with side panels and a front panel with a magnetic closure.
• There is also a HYDRO B water heater without side panels that can be placed on the right side of the ETERA heat pump. The right side panel of the ETERA heat pump is then moved to the right side of the HYDRO B boiler.

• SET_HYDRO B HW-CW 2 x required. They consist of an extensible hydraulic pipe, a manual shut-off valve, a seal and 2 insulation jackets. They connect the water heater to the pre-mounted collector for respectively SKW (CW on the drawing) and DHW (HW on the drawing).
• SET HYDRO B RC 1 x required. Only if a return pipe for DHW is required. Consists of a return pump, a mounting bracket, an extensible hydraulic pipe as a connecting piece between the pre-mounted return pipe on the collector and the return pump, a connecting piece between pump and return on the water heater, and an electrical connection wire for connection to the KSM print of the ETERA heat pump.

• HYDRO B/1F Water heater for installation on the right side of the ETERA heat pump with a built-in expansion vessel.
• HYDRO B/1F A1 Water heater for installation on the right side of the ETERA heat pump without built-in expansion vessel.
• HYDRO BA/1F Freestanding water heater with side panels for installation at a distance from the ETERA heat pump with a built-in expansion vessel.
• HYDRO BA/1F A1 Freestanding water heater with side panels for installation at a distance from the ETERA heat pump without built-in expansion vessel.

• HYDRO BA/1F Freestanding water heater with side panels for installation at a distance from the ETERA heat pump with a built-in expansion vessel.
• HYDRO BA/1F A1 Freestanding water heater with side panels for installation at a distance from the ETERA heat pump without a built-in expansion vessel.

Explanation