Boiler heat pump for the production of domestic hot water. The heat pump
is very energy efficient and has the A+ energy label. Sound insulation ensures
silent operation of the boiler. The tank is made of stainless steel and has a
volume of 200 or 300 liters, which allows the production of domestic hot water. The device is equipped with a micro-channel heat exchanger made of aluminium, with the main advantage that the heat exchanger is not in contact with water.
Technical data
|
Volume | l | 200 | 300 | Max. heating capacity heat pump + electrical resistance | W | 3000 | 3000 | Thermal capacity heat pump * | W | 1500 | 1500 | Electric compressor capacity | W | 410 | 410 | Built-in electrical backup resistance | W | 1500 | 1500 | Operating temperature range | °C | -5 ~ 43 | -5 ~ 43 | Temperature DHW with heat pump | °C | 38 ~ 55 | 38 ~ 55 | Air flow rate | m³/h | 350 | 350 | Static fan pressure **** | Pa | 40 | 40 | Sound power level | dB | 53 | 50 | Sound pressure level at 1 m *** | dB(A) | 38,10 | 35,00 | Refrigerant (GWP) | | R290 (3) | R290 (3) | Precharged quantity of refrigerant | g(CO2eq-kg) | 150 (0,45) | 150 (0,45) | Heating time ** | h | 7h51 | 10h21 | COP ** | | 3,09 | 3,41 | Water heating energy efficiency ηwh ** | % | 129,30 | 142.2 | Energy efficiency class ** | | A+ | A+ | Annual electricity consumption (AEC) ** | kWh | 792 | 1178 | Load profile ** | | L | XL | Maximum quantity of hot water (40°C) ** | l | 278 | 376 | Dimensions | mm | Ø640 X 1600 H | Ø640 X 1905 H | Weight (net) | kg | 73 | 84 | Connection diameter of air duct (supply/discharge) | mm | 2 x 160 | 2 x 160 | Hydraulic connection diameter | inch | 3/4" | 3/4" | Power supply | V / Ph / Hz | 230/1/50 | 230/1/50 | Automatic fuse | A | 16 | 16 | Protection class | | IPX1 | IPX1 | Water tank material | | stainless steel | stainless steel | Maximum operating pressure | bar | 7 | 7 | Maximum temperature with electrical backup resistance | °C | 75 | 75 | * Test conditions: ambient temp.: 20°C D.B. /15°C W.B., water inlet/outlet temp.: 15°C /55°C | ** HPBI 200A: Test conditions according to standard EN 16147: ambient temp.: 20°C D.B. /15°C W.B., water inlet/outlet temp.: 10°C /55°C, outside temp.: 7°C D.B. /6°C N.B. | ** HPBI 300A: Test conditions according to standard EN 16147: ambient temp.: 20°C D.B. /15°C W.B., water inlet/outlet temp.: 10°C /53°C, outside temp.: 7°C D.B. /6°C N.B. | *** Measured in a semi-anechoic chamber with ducted inlet/outlet of 2,5m | **** Static fan presure : possible up to 120 Pa, but this will change the sound pressure level up to 55 dB(A) |
Dimensions
|
A | mm | 1595 | 1815 | B | mm | 1157 | 1377 | C | mm | 918 | 1138 | D | mm | 670 | 670 | E | mm | 279 | 279 | F | mm | 124 | 124 | G | mm | Ø640 | Ø640 | H | mm | Ø160 | Ø160 | I | mm | 823 | 1043 |
|