PRODUCTS
EShop-number
Password
Welcome to CAIROX BELGIUM

AFP • Antifreeze valves

The mechanical antifreeze valves (iStop® 108701 en 108702) are used to keep the water in the heating and cooling circuit running and to prevent ice formation. When the temperature of the fluid reaches 3°C, the internal sensor opens and allows water to drain out of the system. This valve is designed for systems with monobloc heat pumps and prevents damage to the machine and the circuit components if the power supply is cut off and the temperature of the fluid drops below 3°C.

The iStop® 108701 valve is suitable for standard heat pumps with a supply water temperature up to 65 °C.
The iStop® 108702 valve is designed for heat pumps using the new refrigerants with a supply water temperature up to 90 °C.

Brand

Caleffi

Composition

  • Sold by piece

Installation

The device must only be installed in a vertical position, with the outlet facing downwards, to allow the drained water to flow out properly and free from obstructions. The antifreeze valves must be installed outdoors, where the lowest temperatures are reached if the heat pump is blocked. The antifreeze valves must be positioned far away from heat sources in order to maintain proper operation. It is recommended to install the antifreeze valves on both pipes (flow and return). Otherwise, the pipe may remain filled with water, leading to the risk of ice formation.

The complete installation and commissioning instructions can be found in the manual under “Downloads”.

Specifications

  • Connection: G 1 1/4" A (ISO 228-1) M
  • Maximum operation pressure: 10 bar
  • Fluid temperature range:
    • AFP (iStop® 108701): 0 to 65°C
    • AFP HT (iStop® 108702): 0 to 90°C
  • Ambient temperature range: -30 to 60°C
  • Opening temperature: 3°C
  • Closing temperature: 4°C
  • Material: brass

Accessories

Loose nut coupling, type: LCJ

Applicable outdoor units

  • Monoblock, type: CGW-M (R32 - water temperature up to 55°C)
  • Monoblock, type: CGW-M SG (R32 - water temperature up to 55°C)
  • Monoblock, type: CWP-M (R290 - water temperature up to 75°C)

The antifreeze valve allows drainage of the fluid in the circuit when the circuit temperature reaches a value of 3°C.

Configuration

Dimensions

 AB (mm)C (mm)D (mm)
AFP (0–65°C) iStop® 1087011 1/4"598336
AFP HT (0–90°C) iStop® 1087021 1/4"597735
HELPCopyrightSales conditionsCookie policyAirvance Group

Requesting information. Please wait a moment...